title

Composites Weekly

Unknown

0
Followers
0
Plays
Composites Weekly
Composites Weekly

Composites Weekly

Unknown

0
Followers
0
Plays
OVERVIEWEPISODESYOU MAY ALSO LIKE

Details

About Us

The leading news and information podcast of the composites industry

Latest Episodes

Providing Lightweight Electromagnetic Absorbing Materials for the Aerospace, Defense, and Consumer Products Industries

This week, we welcome Dr. Robert Doneker of Tangitek, LLC, a technology start-up company located in Portland, Oregon. They develop carbon fiber composites for the aerospace, electronics, defense, communications, and consumer products industries. On this episode, we’ll be discussing theirMF-RAMTM, a lightweight thin electromagnetic absorbing flocked carbon fiber material used for EMI/RFI suppression in electronics... The post Providing Lightweight Electromagnetic Absorbing Materials for the Aerospace, Defense, and Consumer Products Industries appeared first on Composites Weekly.

-1 s1 w ago
Comments
Providing Lightweight Electromagnetic Absorbing Materials for the Aerospace, Defense, and Consumer Products Industries

Combining Traditional Craftsmanship with Cutting Edge Technology – Interview with Dave Salvaggio and Lyle Brummer of SpeedKore

This week I welcome Dave Salvaggio and Lyle Brummer of SpeedKore Performance Group on the show. SpeedKore is an American Performance Company where engineers and artisans combine traditional craftsmanship with cutting edge technology. They specialize in custom performance vehicles, carbon fiber composite part manufacturing, and engine integration. SpeedKore manufactures thehighest quality carbon fiber upgrades, exceeding... The post Combining Traditional Craftsmanship with Cutting Edge Technology – Interview with Dave Salvaggio and Lyle Brummer of SpeedKore appeared first on Composites Weekly.

-1 s3 w ago
Comments
Combining Traditional Craftsmanship with Cutting Edge Technology – Interview with Dave Salvaggio and Lyle Brummer of SpeedKore

Transforming Post-Consumer Waste into Long-Lasting Durable Products – Interview with Brian Gaughan of Integrico Composites

This week I welcomeBrian Gaughan of IntegriCo Composites on the show to discuss how theirpatented technology is using recycled landfill-bound plastic to create composite railroad ties that far exceed industry standards for high consistency and structural integrity. Their products are formulated from extremely tough plastic, and the specialized, low-heat process used by IntegriCo preserves the... The post Transforming Post-Consumer Waste into Long-Lasting Durable Products – Interview with Brian Gaughan of Integrico Composites appeared first on Composites Weekly.

-1 sNOV 6
Comments
Transforming Post-Consumer Waste into Long-Lasting Durable Products – Interview with Brian Gaughan of Integrico Composites

Discussing the Benefits of FRP over Wood, Steel & Aluminum with Tom Wright of Bedford Reinforced Plastics

This week we welcome Tom Wright, director of business development for Bedford Reinforced Plastics (BRP) on the show to discuss the benefits of FRP (fiber reinforced plastics) over traditional building materials such as wood, steel, and aluminum. BRP is a company that offers a wide variety of structural products made of fiberglass-reinforced polymer, including PROForms... The post Discussing the Benefits of FRP over Wood, Steel & Aluminum with Tom Wright of Bedford Reinforced Plastics appeared first on Composites Weekly.

-1 sOCT 26
Comments
Discussing the Benefits of FRP over Wood, Steel & Aluminum with Tom Wright of Bedford Reinforced Plastics

A Giant Leap Forward in Composite Decking Technology – Interview with Chris Camfferman of Deckorators

This week I welcome Chris Camfferman, managing director of marketing for Deckorators, a company that manufactures composite decking using their patented “Eovations” technology. This technology provides the best stiffness-to-weight ratio and lowest thermal expansion/contraction of any thermoplastic deck board available. Deckorators composite decking is composed of a mix of polypropylene and calcium carbonate, which is... The post A Giant Leap Forward in Composite Decking Technology – Interview with Chris Camfferman of Deckorators appeared first on Composites Weekly.

-1 sOCT 21
Comments
A Giant Leap Forward in Composite Decking Technology – Interview with Chris Camfferman of Deckorators

Revitalizing American Manufacturing by Providing Better Ways to Source Custom Parts

On this week’s episode, I welcome Greg Paulsen of Xometry on the show. Greg leads the Project Engineering team at Xometry, which acts as the primary interface for project management, services, and support. Today, we’ll be discussing how their proprietary software platform enables product designers and engineers to instantly access the capacity of a network... The post Revitalizing American Manufacturing by Providing Better Ways to Source Custom Parts appeared first on Composites Weekly.

-1 sOCT 8
Comments
Revitalizing American Manufacturing by Providing Better Ways to Source Custom Parts

Providing Solutions for Industrial Fiberglass Waste – Interview with Dr. Karl Englund

This week, I welcome Dr. Karl Englund of Global Fiberglass Solutions. GFS is a composite fiberglass recycling and green manufacturing firm that specializes in recycling thermoset composite fiberglass waste,and using this material to manufacture new products. They provide industrial fiberglass waste recycling services to industries worldwide, including the wind energy, aerospace, maritime and manufacturing sectors.... The post Providing Solutions for Industrial Fiberglass Waste – Interview with Dr. Karl Englund appeared first on Composites Weekly.

-1 sOCT 4
Comments
Providing Solutions for Industrial Fiberglass Waste – Interview with Dr. Karl Englund

How Newer Composite Technology and Handbuilt Craftsmanship is Changing the Bicycle Industry

This week, we welcome Matthew Butterman on the show to discuss the growing role of newer composites in the Bicycle industry. Matthew is the news editor of Handbuilt Bicycle Newsand a 25-year veteran of the bicycle industry. He is also the current News Director for the Philly Bike Expo. On this episode, we’ll be discussing... The post How Newer Composite Technology and Handbuilt Craftsmanship is Changing the Bicycle Industry appeared first on Composites Weekly.

-1 sSEP 20
Comments
How Newer Composite Technology and Handbuilt Craftsmanship is Changing the Bicycle Industry

Discussing The Benefits of Continuous Filament Fabrication with Andrew de Geofroy of MarkForged

This week, I welcome Andrew de Geofroy, Vice President of Application Engineering at MarkForged on the show to discuss their 3D continuous filament fabrication (CFF) process, which is capable of printing with carbon fiber reinforcement. This advancement in 3D printing introduces a turning point in additive manufacturing by combining two materials. Their unique fabrication process... The post Discussing The Benefits of Continuous Filament Fabrication with Andrew de Geofroy of MarkForged appeared first on Composites Weekly.

-1 sSEP 16
Comments
Discussing The Benefits of Continuous Filament Fabrication with Andrew de Geofroy of MarkForged

Providing Composite Solutions to the Aging Infrastructure Industry – Interview with Tim Kenerson of AIT Bridges

On this episode, I am pleased to welcomeTim Kenerson of AIT Bridges. AIT is an engineering and manufacturing company that supplies advanced composite materials for bridges while providing low-cost solutions to an aging infrastructure industry. On this episode, we’ll be discussing the addition of a composite tub girder to its composite bridge system offering. The... The post Providing Composite Solutions to the Aging Infrastructure Industry – Interview with Tim Kenerson of AIT Bridges appeared first on Composites Weekly.

-1 sAUG 25
Comments
Providing Composite Solutions to the Aging Infrastructure Industry – Interview with Tim Kenerson of AIT Bridges
the END

Latest Episodes

Providing Lightweight Electromagnetic Absorbing Materials for the Aerospace, Defense, and Consumer Products Industries

This week, we welcome Dr. Robert Doneker of Tangitek, LLC, a technology start-up company located in Portland, Oregon. They develop carbon fiber composites for the aerospace, electronics, defense, communications, and consumer products industries. On this episode, we’ll be discussing theirMF-RAMTM, a lightweight thin electromagnetic absorbing flocked carbon fiber material used for EMI/RFI suppression in electronics... The post Providing Lightweight Electromagnetic Absorbing Materials for the Aerospace, Defense, and Consumer Products Industries appeared first on Composites Weekly.

-1 s1 w ago
Comments
Providing Lightweight Electromagnetic Absorbing Materials for the Aerospace, Defense, and Consumer Products Industries

Combining Traditional Craftsmanship with Cutting Edge Technology – Interview with Dave Salvaggio and Lyle Brummer of SpeedKore

This week I welcome Dave Salvaggio and Lyle Brummer of SpeedKore Performance Group on the show. SpeedKore is an American Performance Company where engineers and artisans combine traditional craftsmanship with cutting edge technology. They specialize in custom performance vehicles, carbon fiber composite part manufacturing, and engine integration. SpeedKore manufactures thehighest quality carbon fiber upgrades, exceeding... The post Combining Traditional Craftsmanship with Cutting Edge Technology – Interview with Dave Salvaggio and Lyle Brummer of SpeedKore appeared first on Composites Weekly.

-1 s3 w ago
Comments
Combining Traditional Craftsmanship with Cutting Edge Technology – Interview with Dave Salvaggio and Lyle Brummer of SpeedKore

Transforming Post-Consumer Waste into Long-Lasting Durable Products – Interview with Brian Gaughan of Integrico Composites

This week I welcomeBrian Gaughan of IntegriCo Composites on the show to discuss how theirpatented technology is using recycled landfill-bound plastic to create composite railroad ties that far exceed industry standards for high consistency and structural integrity. Their products are formulated from extremely tough plastic, and the specialized, low-heat process used by IntegriCo preserves the... The post Transforming Post-Consumer Waste into Long-Lasting Durable Products – Interview with Brian Gaughan of Integrico Composites appeared first on Composites Weekly.

-1 sNOV 6
Comments
Transforming Post-Consumer Waste into Long-Lasting Durable Products – Interview with Brian Gaughan of Integrico Composites

Discussing the Benefits of FRP over Wood, Steel & Aluminum with Tom Wright of Bedford Reinforced Plastics

This week we welcome Tom Wright, director of business development for Bedford Reinforced Plastics (BRP) on the show to discuss the benefits of FRP (fiber reinforced plastics) over traditional building materials such as wood, steel, and aluminum. BRP is a company that offers a wide variety of structural products made of fiberglass-reinforced polymer, including PROForms... The post Discussing the Benefits of FRP over Wood, Steel & Aluminum with Tom Wright of Bedford Reinforced Plastics appeared first on Composites Weekly.

-1 sOCT 26
Comments
Discussing the Benefits of FRP over Wood, Steel & Aluminum with Tom Wright of Bedford Reinforced Plastics

A Giant Leap Forward in Composite Decking Technology – Interview with Chris Camfferman of Deckorators

This week I welcome Chris Camfferman, managing director of marketing for Deckorators, a company that manufactures composite decking using their patented “Eovations” technology. This technology provides the best stiffness-to-weight ratio and lowest thermal expansion/contraction of any thermoplastic deck board available. Deckorators composite decking is composed of a mix of polypropylene and calcium carbonate, which is... The post A Giant Leap Forward in Composite Decking Technology – Interview with Chris Camfferman of Deckorators appeared first on Composites Weekly.

-1 sOCT 21
Comments
A Giant Leap Forward in Composite Decking Technology – Interview with Chris Camfferman of Deckorators

Revitalizing American Manufacturing by Providing Better Ways to Source Custom Parts

On this week’s episode, I welcome Greg Paulsen of Xometry on the show. Greg leads the Project Engineering team at Xometry, which acts as the primary interface for project management, services, and support. Today, we’ll be discussing how their proprietary software platform enables product designers and engineers to instantly access the capacity of a network... The post Revitalizing American Manufacturing by Providing Better Ways to Source Custom Parts appeared first on Composites Weekly.

-1 sOCT 8
Comments
Revitalizing American Manufacturing by Providing Better Ways to Source Custom Parts

Providing Solutions for Industrial Fiberglass Waste – Interview with Dr. Karl Englund

This week, I welcome Dr. Karl Englund of Global Fiberglass Solutions. GFS is a composite fiberglass recycling and green manufacturing firm that specializes in recycling thermoset composite fiberglass waste,and using this material to manufacture new products. They provide industrial fiberglass waste recycling services to industries worldwide, including the wind energy, aerospace, maritime and manufacturing sectors.... The post Providing Solutions for Industrial Fiberglass Waste – Interview with Dr. Karl Englund appeared first on Composites Weekly.

-1 sOCT 4
Comments
Providing Solutions for Industrial Fiberglass Waste – Interview with Dr. Karl Englund

How Newer Composite Technology and Handbuilt Craftsmanship is Changing the Bicycle Industry

This week, we welcome Matthew Butterman on the show to discuss the growing role of newer composites in the Bicycle industry. Matthew is the news editor of Handbuilt Bicycle Newsand a 25-year veteran of the bicycle industry. He is also the current News Director for the Philly Bike Expo. On this episode, we’ll be discussing... The post How Newer Composite Technology and Handbuilt Craftsmanship is Changing the Bicycle Industry appeared first on Composites Weekly.

-1 sSEP 20
Comments
How Newer Composite Technology and Handbuilt Craftsmanship is Changing the Bicycle Industry

Discussing The Benefits of Continuous Filament Fabrication with Andrew de Geofroy of MarkForged

This week, I welcome Andrew de Geofroy, Vice President of Application Engineering at MarkForged on the show to discuss their 3D continuous filament fabrication (CFF) process, which is capable of printing with carbon fiber reinforcement. This advancement in 3D printing introduces a turning point in additive manufacturing by combining two materials. Their unique fabrication process... The post Discussing The Benefits of Continuous Filament Fabrication with Andrew de Geofroy of MarkForged appeared first on Composites Weekly.

-1 sSEP 16
Comments
Discussing The Benefits of Continuous Filament Fabrication with Andrew de Geofroy of MarkForged

Providing Composite Solutions to the Aging Infrastructure Industry – Interview with Tim Kenerson of AIT Bridges

On this episode, I am pleased to welcomeTim Kenerson of AIT Bridges. AIT is an engineering and manufacturing company that supplies advanced composite materials for bridges while providing low-cost solutions to an aging infrastructure industry. On this episode, we’ll be discussing the addition of a composite tub girder to its composite bridge system offering. The... The post Providing Composite Solutions to the Aging Infrastructure Industry – Interview with Tim Kenerson of AIT Bridges appeared first on Composites Weekly.

-1 sAUG 25
Comments
Providing Composite Solutions to the Aging Infrastructure Industry – Interview with Tim Kenerson of AIT Bridges
the END
hmly
himalayaプレミアムへようこそ聴き放題のオーディオブックをお楽しみください。